| To activate this function channels 5 and 6 ("GEA 5: Fahrwerk" und "PIT 6: Pitch" bzw. "FLA 6: Klappen") have to be set to at least "50". Reset with the 'helicopter' - Channel 5 is switched using "Flight Mode, Gear". "up" will be "-100" and "down" is "100". - Channel 6 is controlled via "nick"!!! ==> to activate the factory reset you have the switch down "Flight Mode, Gear" and nick forward (at least to "50", easiest full nick forward ). Reset with the 'airplane' - Channel 5 is switched using "Flight Mode, Gear". "up" will be "-100" and "down" is "100". - Channel 6 can be accessed via "Throttle Hold, Flap/Mix". You'll have to reverse channel 6, menu servo reversing "FLA 6: Flap" (manual page 19 [Reversing SW]). With the "control grip" channel 6 is then set to "100". Menu servo reversing shows: THR:N AIL: R ELE:N RUD: R GEA:N FLA: R==> to activate the factory reset you have the switch down "Flight Mode, Gear" and up again, channel 6 ist "100" already and must not be switched. |